Siemens Simatic ET 200SP Base Unit BU15-P16+A0+2B 6ES71936BP000BA0
Product Description
-
In electrical systems, a base unit typically refers to a fundamental unit of measurement or a standard component used as a reference for other measurements or components
-
For instance, in electrical measurements, base units include the watt for power, the ampere for current, and the volt for voltage
-
These units form the foundation for more complex calculations and measurements in electrical engineering
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
Brand |
Siemens |
Product Type |
Base Unit |
Product Code |
6ES71936BP000BA0 |
Product Series |
Simatic ET 200SP |
Product Type Designation |
BU type A0 |
Supply Voltage | |
Rated Value (DC) |
24 V |
External Protection For Power Supply Lines |
Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic |
Current Carrying Capacity |
|
For P1 and P2 Bus, Maximum |
10 A |
For Process Terminals, Maximum |
2 A |
Hardware Configuration | |
Automatic Encoding |
Yes |
Isolation | |
Isolation Tested With |
707 V DC (type test) |
Ambient Conditions |
|
Minimum Horizontal Installation |
-30 °C |
Maximum Horizontal Installation |
60 °C |
Minimum Vertical Installation |
-30 °C |
Maximum Vertical Installation |
50 °C |
Maximum Installation Altitude Above Sea Level |
5 000 m; Restrictions for installation altitudes > 2 000 m |
Connection Method | |
Terminal Type |
Push-in terminal |
Minimum Conductor Cross-Section |
0.14 mm²; AWG 26 |
Maximum Conductor Cross-Section |
2.5 mm²; AWG 14 |
Number Of Process Terminals to I/O module |
16; Pro slot |
Number Of Terminals With Connection to P1 and |
2; Pro slot |
Product Dimension(H x W x D) |
117 x 15 x 35 mm |
Net Weight (lb) |
0.106 lb |
Original: $22.15
-70%$22.15
$6.64
Description
Product Description
-
In electrical systems, a base unit typically refers to a fundamental unit of measurement or a standard component used as a reference for other measurements or components
-
For instance, in electrical measurements, base units include the watt for power, the ampere for current, and the volt for voltage
-
These units form the foundation for more complex calculations and measurements in electrical engineering
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
Brand |
Siemens |
Product Type |
Base Unit |
Product Code |
6ES71936BP000BA0 |
Product Series |
Simatic ET 200SP |
Product Type Designation |
BU type A0 |
Supply Voltage | |
Rated Value (DC) |
24 V |
External Protection For Power Supply Lines |
Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic |
Current Carrying Capacity |
|
For P1 and P2 Bus, Maximum |
10 A |
For Process Terminals, Maximum |
2 A |
Hardware Configuration | |
Automatic Encoding |
Yes |
Isolation | |
Isolation Tested With |
707 V DC (type test) |
Ambient Conditions |
|
Minimum Horizontal Installation |
-30 °C |
Maximum Horizontal Installation |
60 °C |
Minimum Vertical Installation |
-30 °C |
Maximum Vertical Installation |
50 °C |
Maximum Installation Altitude Above Sea Level |
5 000 m; Restrictions for installation altitudes > 2 000 m |
Connection Method | |
Terminal Type |
Push-in terminal |
Minimum Conductor Cross-Section |
0.14 mm²; AWG 26 |
Maximum Conductor Cross-Section |
2.5 mm²; AWG 14 |
Number Of Process Terminals to I/O module |
16; Pro slot |
Number Of Terminals With Connection to P1 and |
2; Pro slot |
Product Dimension(H x W x D) |
117 x 15 x 35 mm |
Net Weight (lb) |
0.106 lb |
