Siemens Simatic ET 200SP Analog Output Module AQ 4xU/I ST 6ES71356HD000BA1
Product Description
-
An analog output module is a component used in control systems to convert digital signals from a controller into analog signals
-
These analog signals can then be used to control various devices such as actuators, valves, or motors
-
It typically outputs voltages or currents that are proportional to the digital values it receives, enabling precise and continuous control in automation processes
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
| Brand | Siemens |
| Product Type | Analog Output Module |
| Product Code | 6ES71356HD000BA1 |
| Product Series | Simatic ET 200SP |
| Product Type Designation | AQ 4xU/I ST |
| HW Functional Status | from FS21 |
| Firmware Version | Yes |
| Usable Base Units | BU type A0, A1 |
| Product Function | |
| I&M Data | Yes; I&M0 to I&M3 |
| Isochronous Mode | No |
| Output Range Scalable | No |
| Engineering With | |
| Step 7 TIA Portal Configurable/Integrated From Version | V11 SP2 / V13 |
| Step 7 Configurable/Integrated From Version | V5.5 SP3 |
| PCS 7 configurable/integrated from version | V8.1 SP1 |
| Profibus from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| Profinet from GSD version/GSD revision | GSDML V2.3 |
| Supply Voltage | |
| Rated Value (DC) | 24 V |
| Lower Limit Permissible Range(DC) | 19.2 V |
| Upper Limit Permissible Range(DC) | 28.8 V |
| Reverse Polarity Protection | Yes |
| Input Current | |
| Maximum Current Consumption | 150 mA |
| Power Loss | 1.5 W |
| Address Area | 8 byte; + 1 byte for QI information |
| Hardware Configuration | |
| Automatic Encoding | Yes |
| Mechanical Coding Element | Yes |
| Type Of Mechanical Coding Element | Type A |
| Analog outputs | |
| Number of analog outputs | 4 |
| Maximum Voltage Output,Short-Circuit Current | 45 mA |
| Minimum Cycle Time (All Channels) | 5 ms |
| Analog Output With Oversampling | No |
| Voltage Output Ranges | |
| 0 to 10 V | Yes; 15 bit |
| 1 V to 5 V | Yes; 13 bit |
| -5 V to +5 V | Yes; 15 bit incl. sign |
| -10 V to +10 V | Yes; 16 bit incl. sign |
| Current Output Ranges | |
| 0 to 20 mA | Yes; 15 bit |
| -20 mA to +20 mA | Yes; 16 bit incl. sign |
| 4 mA to 20 mA | Yes; 14 bit |
| Connection Of Actuators | |
| For Voltage Output Two-Wire Connection | Yes |
| For Voltage Output Four-Wire Connection | Yes |
| For Current Output Two-Wire Connection | Yes |
| Load Impedance (in Rated Range Of Output) | |
| Minimum With Voltage Outputs | 2 kΩ |
| Maximum With Voltage Outputs,Capacitive Load | 1 μF |
| Maximum With Current Outputs | 500 Ω |
| Maximum With Current Outputs,Inductive Load | 1 mH |
| Voltages At The Outputs | 30 V |
| Maximum Shielded Cable Length | 1 000 m; 200 m for voltage output |
| Maximum Resolution With Overrange (Bit Including Sign) | 16 bit |
| Settling Time | |
| For Resistive Load | 0.1 ms |
| For Capacitive Load | 1 ms |
| For Inductive Load | 0.5 ms |
| Errors/Accuracies | |
| Linearity Error (Relative To Output Range), (+/-) | 0.03 % |
| Temperature error (Relative To Output Range), (+/-) | 0.005 %/K |
| Minimum Crosstalk Between The Outputs | -50 dB |
| Repeat Accuracy In Steady State at 25 °C (Relative To Output Range) (+/-) | 0.05 % |
| Operational Error Limit In Overall Temperature Range | |
| Voltage Relative To Output Range, (+/-) | 0.5 % |
| Current Relative To Output Range, (+/-) | 0.5 % |
| Basic Error Limit (Operational Limit at 25 °C) | |
| Voltage Relative To Output Range, (+/-) | 0.3 % |
| Current Relative To Output Range, (+/-) | 0.3 % |
| Interrupts/Diagnostics/Status Information | |
| Diagnostics Function | Yes |
| Substitute Values Connectable | Yes |
| Diagnostic Alarm | Yes |
| Diagnoses | |
| Monitoring The Supply Voltage | Yes |
| Wire-Break | Yes |
| Short-Circuit | Yes |
| Group Error | Yes |
| Overflow/Underflow | |
Description
Product Description
-
An analog output module is a component used in control systems to convert digital signals from a controller into analog signals
-
These analog signals can then be used to control various devices such as actuators, valves, or motors
-
It typically outputs voltages or currents that are proportional to the digital values it receives, enabling precise and continuous control in automation processes
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
| Brand | Siemens |
| Product Type | Analog Output Module |
| Product Code | 6ES71356HD000BA1 |
| Product Series | Simatic ET 200SP |
| Product Type Designation | AQ 4xU/I ST |
| HW Functional Status | from FS21 |
| Firmware Version | Yes |
| Usable Base Units | BU type A0, A1 |
| Product Function | |
| I&M Data | Yes; I&M0 to I&M3 |
| Isochronous Mode | No |
| Output Range Scalable | No |
| Engineering With | |
| Step 7 TIA Portal Configurable/Integrated From Version | V11 SP2 / V13 |
| Step 7 Configurable/Integrated From Version | V5.5 SP3 |
| PCS 7 configurable/integrated from version | V8.1 SP1 |
| Profibus from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| Profinet from GSD version/GSD revision | GSDML V2.3 |
| Supply Voltage | |
| Rated Value (DC) | 24 V |
| Lower Limit Permissible Range(DC) | 19.2 V |
| Upper Limit Permissible Range(DC) | 28.8 V |
| Reverse Polarity Protection | Yes |
| Input Current | |
| Maximum Current Consumption | 150 mA |
| Power Loss | 1.5 W |
| Address Area | 8 byte; + 1 byte for QI information |
| Hardware Configuration | |
| Automatic Encoding | Yes |
| Mechanical Coding Element | Yes |
| Type Of Mechanical Coding Element | Type A |
| Analog outputs | |
| Number of analog outputs | 4 |
| Maximum Voltage Output,Short-Circuit Current | 45 mA |
| Minimum Cycle Time (All Channels) | 5 ms |
| Analog Output With Oversampling | No |
| Voltage Output Ranges | |
| 0 to 10 V | Yes; 15 bit |
| 1 V to 5 V | Yes; 13 bit |
| -5 V to +5 V | Yes; 15 bit incl. sign |
| -10 V to +10 V | Yes; 16 bit incl. sign |
| Current Output Ranges | |
| 0 to 20 mA | Yes; 15 bit |
| -20 mA to +20 mA | Yes; 16 bit incl. sign |
| 4 mA to 20 mA | Yes; 14 bit |
| Connection Of Actuators | |
| For Voltage Output Two-Wire Connection | Yes |
| For Voltage Output Four-Wire Connection | Yes |
| For Current Output Two-Wire Connection | Yes |
| Load Impedance (in Rated Range Of Output) | |
| Minimum With Voltage Outputs | 2 kΩ |
| Maximum With Voltage Outputs,Capacitive Load | 1 μF |
| Maximum With Current Outputs | 500 Ω |
| Maximum With Current Outputs,Inductive Load | 1 mH |
| Voltages At The Outputs | 30 V |
| Maximum Shielded Cable Length | 1 000 m; 200 m for voltage output |
| Maximum Resolution With Overrange (Bit Including Sign) | 16 bit |
| Settling Time | |
| For Resistive Load | 0.1 ms |
| For Capacitive Load | 1 ms |
| For Inductive Load | 0.5 ms |
| Errors/Accuracies | |
| Linearity Error (Relative To Output Range), (+/-) | 0.03 % |
| Temperature error (Relative To Output Range), (+/-) | 0.005 %/K |
| Minimum Crosstalk Between The Outputs | -50 dB |
| Repeat Accuracy In Steady State at 25 °C (Relative To Output Range) (+/-) | 0.05 % |
| Operational Error Limit In Overall Temperature Range | |
| Voltage Relative To Output Range, (+/-) | 0.5 % |
| Current Relative To Output Range, (+/-) | 0.5 % |
| Basic Error Limit (Operational Limit at 25 °C) | |
| Voltage Relative To Output Range, (+/-) | 0.3 % |
| Current Relative To Output Range, (+/-) | 0.3 % |
| Interrupts/Diagnostics/Status Information | |
| Diagnostics Function | Yes |
| Substitute Values Connectable | Yes |
| Diagnostic Alarm | Yes |
| Diagnoses | |
| Monitoring The Supply Voltage | Yes |
| Wire-Break | Yes |
| Short-Circuit | Yes |
| Group Error | Yes |
| Overflow/Underflow | |
