Siemens Simatic DP 1512SP-1 PN For ET 200SP Central Processing Unit 6ES75121DK010AB0
Product Description
-
The CPU (Central Processing Unit) is the primary component of a computer that performs most of the processing tasks
-
It executes instructions from programs, handles data, and coordinates the activities of other hardware components
-
Often referred to as the "brain" of the computer, the CPU processes commands and performs calculations necessary for software operations
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
| Brand | Siemens |
| Product Type | Central Processing Unit |
| Product Code | 6ES75121DK010AB0 |
| Product Series | Simatic DP 1512SP-1 PN For ET 200SP |
| Product Type Designation | CPU 1512SP-1 PN |
| Hw Functional Status | FS05 |
| Firmware Version | V2.9 |
| General Information | |
| Product Type Designation | CPU 1512SP-1 PN |
| Hw Functional Status | FS05 |
| Firmware Version | V2.9 |
| Product Function | |
| I&M Data | Yes; I&M0 to I&M3 |
| Module Swapping During Operation (hot Swapping) | Yes; Multi-hot swapping |
| Isochronous Mode | Yes; Only with PROFINET; with minimum OB 6x cycle of 625 μs |
| Engineering With | |
| STEP 7 TIA Portal Configurable/Integrated From Version | V17 (FW V2.9) / V13 SP1 Update 4 (FW V1.8) or higher |
| Control Elements | |
| Mode Selector Switch | 1 |
| Supply Voltage | |
| Rated Value (DC) | 24 V |
| Lower Limit Permissible Range(DC) | 19.2 V |
| Upper Limit Permissible Range(DC) | 28.8 V |
| Reverse Polarity Protection | Yes |
| Mains Buffering | |
| Mains/Voltage Failure Stored Energy Time | 5 ms |
| Input current | |
| Current Consumption (rated Value) | 0.6 A |
| Maximum Current Consumption | 0.9 A |
| Maximum Inrush Current | 4.7 A; Rated value |
| I2t | 0.14 A2·s |
| Power | |
| Infeed Power To The Backplane Bus | 8.75 W |
| Power Loss | 5.6 W |
| Memory | |
| Number Of Slots For Simatic Memory Card | 1 |
| SIMATIC Memory Card Required | Yes |
| Work Memory | |
| Integrated For Program | 200 kbyte |
| Integrated For Data | 1 Mbyte |
| Load Memory | |
| Maximum Plug-In (SIMATIC Memory Card) | 32 Gbyte |
| Backup | |
| Maintenance-Free | Yes |
| CPU Processing Times | |
| For Bit Operations Typical | 48 ns |
| For Word Operations Typical | 58 ns |
| For Fixed Point Arithmetic Typical | 77 ns |
| For Floating Point Arithmetic Typical | 307 ns |
| Cpu-Blocks | |
| Number Of Elements (Total) | 4 000; Blocks (OB, FB, FC, DB) and UDTs |
| FB | |
| Number Range | 0 ... 65 535 |
| Maximum Size | 200 kbyte |
| FC | |
| Number Range | 0 ... 65 535 |
| Maximum Size | 200 kbyte |
| OB | |
| Maximum Size | 200 kbyte |
| Nesting Depth | |
| Per Priority Class | 24 |
| Counters,Timers & Their Retentivity | |
| S7 Counter | |
| Number | 2048 |
| Retentivity | |
| Adjustable | Yes |
| IEC Counter | |
| Number | Any (only limited by the main memory) |
| Retentivity | |
| Adjustable | Yes |
| S7 Times | |
| Number | 2 048 |
| Retentivity | |
| Adjustable | Yes |
| IEC Timer | |
| Number | Any (only limited by the main memory) |
| Retentivity | |
| Adjustable | Yes |
| Data Areas And Their Retentivity | |
| Maximum Retentive Data Area (incl. Timers, Counters, Flags) | 128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB |
| Data Blocks | |
| Retentivity Adjustable | Yes |
| Retentivity Preset | No |
| Local Data | |
| Maximum Per Priority Class | 64 kbyte; max. 16 KB per block |
| Address Area | |
| Number of IO Modules | 2 048; max. number of modules / submodules |
| I/O Address Area | |
| Inputs | 32 kbyte; All inputs are in the process image |
| Outputs | 32 kbyte; All outputs are in the process image |
| Per Integrated IO Subsystem < |
|
Description
Product Description
-
The CPU (Central Processing Unit) is the primary component of a computer that performs most of the processing tasks
-
It executes instructions from programs, handles data, and coordinates the activities of other hardware components
-
Often referred to as the "brain" of the computer, the CPU processes commands and performs calculations necessary for software operations
-
Warranty and support will be provided by vendor
-
Note:*Actual product image may vary from that shown on the picture
Product Specification
| Brand | Siemens |
| Product Type | Central Processing Unit |
| Product Code | 6ES75121DK010AB0 |
| Product Series | Simatic DP 1512SP-1 PN For ET 200SP |
| Product Type Designation | CPU 1512SP-1 PN |
| Hw Functional Status | FS05 |
| Firmware Version | V2.9 |
| General Information | |
| Product Type Designation | CPU 1512SP-1 PN |
| Hw Functional Status | FS05 |
| Firmware Version | V2.9 |
| Product Function | |
| I&M Data | Yes; I&M0 to I&M3 |
| Module Swapping During Operation (hot Swapping) | Yes; Multi-hot swapping |
| Isochronous Mode | Yes; Only with PROFINET; with minimum OB 6x cycle of 625 μs |
| Engineering With | |
| STEP 7 TIA Portal Configurable/Integrated From Version | V17 (FW V2.9) / V13 SP1 Update 4 (FW V1.8) or higher |
| Control Elements | |
| Mode Selector Switch | 1 |
| Supply Voltage | |
| Rated Value (DC) | 24 V |
| Lower Limit Permissible Range(DC) | 19.2 V |
| Upper Limit Permissible Range(DC) | 28.8 V |
| Reverse Polarity Protection | Yes |
| Mains Buffering | |
| Mains/Voltage Failure Stored Energy Time | 5 ms |
| Input current | |
| Current Consumption (rated Value) | 0.6 A |
| Maximum Current Consumption | 0.9 A |
| Maximum Inrush Current | 4.7 A; Rated value |
| I2t | 0.14 A2·s |
| Power | |
| Infeed Power To The Backplane Bus | 8.75 W |
| Power Loss | 5.6 W |
| Memory | |
| Number Of Slots For Simatic Memory Card | 1 |
| SIMATIC Memory Card Required | Yes |
| Work Memory | |
| Integrated For Program | 200 kbyte |
| Integrated For Data | 1 Mbyte |
| Load Memory | |
| Maximum Plug-In (SIMATIC Memory Card) | 32 Gbyte |
| Backup | |
| Maintenance-Free | Yes |
| CPU Processing Times | |
| For Bit Operations Typical | 48 ns |
| For Word Operations Typical | 58 ns |
| For Fixed Point Arithmetic Typical | 77 ns |
| For Floating Point Arithmetic Typical | 307 ns |
| Cpu-Blocks | |
| Number Of Elements (Total) | 4 000; Blocks (OB, FB, FC, DB) and UDTs |
| FB | |
| Number Range | 0 ... 65 535 |
| Maximum Size | 200 kbyte |
| FC | |
| Number Range | 0 ... 65 535 |
| Maximum Size | 200 kbyte |
| OB | |
| Maximum Size | 200 kbyte |
| Nesting Depth | |
| Per Priority Class | 24 |
| Counters,Timers & Their Retentivity | |
| S7 Counter | |
| Number | 2048 |
| Retentivity | |
| Adjustable | Yes |
| IEC Counter | |
| Number | Any (only limited by the main memory) |
| Retentivity | |
| Adjustable | Yes |
| S7 Times | |
| Number | 2 048 |
| Retentivity | |
| Adjustable | Yes |
| IEC Timer | |
| Number | Any (only limited by the main memory) |
| Retentivity | |
| Adjustable | Yes |
| Data Areas And Their Retentivity | |
| Maximum Retentive Data Area (incl. Timers, Counters, Flags) | 128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB |
| Data Blocks | |
| Retentivity Adjustable | Yes |
| Retentivity Preset | No |
| Local Data | |
| Maximum Per Priority Class | 64 kbyte; max. 16 KB per block |
| Address Area | |
| Number of IO Modules | 2 048; max. number of modules / submodules |
| I/O Address Area | |
| Inputs | 32 kbyte; All inputs are in the process image |
| Outputs | 32 kbyte; All outputs are in the process image |
| Per Integrated IO Subsystem < |
|
